Fischer Tropsch wax is methylene polymer is hydrocarbon-based synthetic by natural gas or synthetic hydrocarbons.
Fischer-Tropsch wax has a high melting point, low viscosity, hardness and other characteristics.F.T wax with narrow distribution of MW,odorless, suitable for masterbatch, it has very good wettability with pigments and fillers, and can reduce the viscosity of LDPE resin, can significantly reduce the processing current in production, so it can save energy.F.T wax with the characteristics of narrow distribution of MW, high melting point, low viscosity, fast solidification, has good compatibility with EVA resin and petroleum resin, has good thermal stability, will not change color in a few hours under 180°C baking. Suitable to be used in hot melt coating, can replace the imported products.
Fischer Tropsch Wax For thermoplastic road line marking paint Marking Paint
Fischer Tropsch Wax For Marking Paint
1.PVC lubricants,
2.white powder or flake or grains
3.it have good external lubrication.
1. what is Fischer Tropsch Wax
Fischer-Tropsch (Fischer Tropsch) wax is methylene polymer is hydrocarbon-based
synthetic by natural gas or synthetic hydrocarbons.
Fischer-Tropsch wax has a high melting point, low viscosity, hardness and other characteristics
2. TYPICAL PROPERTIES of Fischer Tropsch Wax
|
Item |
Ft wax |
|
Appearance |
Powder or granular |
|
Color Saybolt |
≥15 |
|
Dropping Point ℃ |
100±3 |
|
Solidification Point ℃ |
89-93 |
|
Viscosity mPa.s@140℃ |
≤20 |
|
Penetration dmm@25℃ |
≤5 |
|
Solubility of butanone % |
≤1.0 |
3.Application of Fischer Tropsch Wax
PVC processing:
F.T wax can effectively reduce the plasticizing torque; extend the plasticizing and thermal stability time. As the external lubricant of PVC processing, the lubricant is better than PE wax and paraffin wax,compare with PE wax,the dosage can be reduced by 30%
Hot melt adhesive:
F.T wax with the characteristics of narrow distribution of MW, high melting point, low viscosity, fast solidification, has good compatibility with EVA resin and petroleum resin, has good thermal stability, will not change color in a few hours under 180°C baking. Suitable to be used in hot melt coating, can replace the imported products.
Color masterbatch, masterbatch:
F.T wax with narrow distribution of MW,odorless, suitable for masterbatch, it has very good wettability with pigments and fillers, and can reduce the viscosity of LDPE resin, can significantly reduce the processing current in production, so it can save energy.
Other fields:
Processing agent of other plastics and can be used to make some special waxes.
4.Matters needing attention:
1 should be well ventilated, storage, temperature is appropriate, it is forbidden to sunlight.
2, store paraffin wax sources away from fire.
3, the use of heating temperature should not be too high, so as to avoid oxidation.
Shipping Port Guanzhou, Shenzhen, Shanghai,Dalian, Qingdao
Packaging Craft paper bags, PE inner liner, 25kg net
Storage Cool, Dry and well ventilated area at room temperature
Shipment By Sea, , By Air, By Track, By Express
